Blank screen

Okey dokey so when I do a vertical kramual and I put a completely horizontal line under where he stops , when he hits the line the screen goes white, but the spedometer says 0 pixels per frame and the timer is still counting. In this video it does the same thing, except the head hits the line when I have the bottom of his sled hitting the line https://www.youtube.com/watch?v=h7u_AUn1HcM. Does it really make that much of a difference, or do I need to do something differently?

There's a glitch that when the speedometer reads 0 the screen goes blank.

There's also a glitch that when the screen goes blank the speedometer reads 0.

Sooo... chicken or egg?

Idk i just couldn't tell if what shotoku was referring to was the general blank screen glitch. like if he's never seen it before.

It's more difficult to do it on his tail, because the tail contact point and the 2nd peg contact point are really close to each other in kramual position, so when you push the tail side, the contact points take up the same spot, and when 2 contact points are in the same point, bad things happen.

So, impossible to stall bosh when the tail of the sled is facing down?
(Also guys I know the blank screen glitch, that wasn't the question -.- You two are so helpful)

Theoretically speaking, it's not impossible, but it's improbable in practice.