Need YOUR help to split Catalyst Scened
4 posters
Page 1 of 1
Need YOUR help to split Catalyst Scened
As the title says, i need your help.
I really suck badly at splitting tracks that recycles a lot (thats why mff4 was easy to split) like Catalyst.
So if you want to help me you just draw some guide lines, to show me where i can scene, and where I can't scene. Then you just makes a lot of save files like "split3" and in it, there should be guidelines to show where to scene.
If you want to help, then I'll PM you with the .sol. Make all the save files now, so you don't have to watch all the track, when i'm the scening it
Btw, you need to be pretty good at splitting
Thanks!
I really suck badly at splitting tracks that recycles a lot (thats why mff4 was easy to split) like Catalyst.
So if you want to help me you just draw some guide lines, to show me where i can scene, and where I can't scene. Then you just makes a lot of save files like "split3" and in it, there should be guidelines to show where to scene.
If you want to help, then I'll PM you with the .sol. Make all the save files now, so you don't have to watch all the track, when i'm the scening it
Btw, you need to be pretty good at splitting
Thanks!
Derpinator- Member
Re: Need YOUR help to split Catalyst Scened
just do like a big grid through where it recycles and mask
Smitsy- Member
Re: Need YOUR help to split Catalyst Scened
Dont understands you Btw when i asked about what masking were, people said i needed a very advanced editing program. I use Wmm
can't you help by setting guidelines and all that stuff like i said
As far as i don't get help, i won't work on it, because im afraid of i screw it all up
can't you help by setting guidelines and all that stuff like i said
As far as i don't get help, i won't work on it, because im afraid of i screw it all up
Derpinator- Member
Re: Need YOUR help to split Catalyst Scened
https://www.youtube.com/watch?v=kL6VSgQG0P4
basically, make an overlapping area...
basically, make an overlapping area...
Re: Need YOUR help to split Catalyst Scened
i have watched it at least 100 times. It doesn't says what to do if it recycles a lot
Derpinator- Member
Re: Need YOUR help to split Catalyst Scened
if it recycles a lot.. you do the same thing.
was that so hard?
was that so hard?
Lankher- Member
Re: Need YOUR help to split Catalyst Scened
Rapto wrote:i have watched it at least 100 times. It doesn't says what to do if it recycles a lot
Uhh, its pretty easy, just the same thing but in diff directions...
Smitsy- Member
Re: Need YOUR help to split Catalyst Scened
if it recycles a lot, do the following:
1. plan out how big your zoom will be
2. mark the edges of the view in live draw so you can see what areas will be seen and what won't
3. do just like HKay's tut, but start from an edge and go straight across. You can start in the middle, you just have to go in one direction then the other. Here, I'll use silent flame as an example.
(that took forever to make )
1. plan out how big your zoom will be
2. mark the edges of the view in live draw so you can see what areas will be seen and what won't
3. do just like HKay's tut, but start from an edge and go straight across. You can start in the middle, you just have to go in one direction then the other. Here, I'll use silent flame as an example.
(that took forever to make )
Re: Need YOUR help to split Catalyst Scened
I think i have got it now
And after that i just use the right recordings?
And after that i just use the right recordings?
Derpinator- Member
Re: Need YOUR help to split Catalyst Scened
before you erase the first chunk, save that as part 1 then before you erase the second time, save that as part 2, etc. Then just cut from one recording to the other somewhere in the overlapping area. if you do it well nobody will notice. Bolted to the wall cut from one recording to the other 11 timesRapto wrote:I think i have got it now
And after that i just use the right recordings?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Mon Mar 18, 2024 11:03 am by alpha leonis
» bubblegum - Pure5152
Thu Nov 23, 2023 4:36 am by Rafael
» Started in 2020 - thoughts?
Mon Jul 24, 2023 1:21 pm by cvang
» Hypersonic Motion - Preview and explanation
Mon Jul 24, 2023 12:15 pm by alpha leonis
» Track question
Mon Jul 24, 2023 12:14 pm by alpha leonis
» Line Rider Pointy Wobbly Italian Rat ~ Leonis
Mon Jul 24, 2023 12:12 pm by alpha leonis
» Line Rider Prism ~ Leonis
Mon Jul 24, 2023 12:11 pm by alpha leonis
» Playtime - pure5152
Tue May 16, 2023 4:05 pm by Sheldon
» I coded today!
Mon Mar 20, 2023 6:53 am by jimmysanders